BLEASS Classic FX Bundle

The BLEASS Classic FX Bundle contains 9 of BLEASS’ amazing FX plugins. 

BLEASS Chorus brings stunning stereo and allows for wide creative freedom. 

BLEASS Delay transforms your sounds into cinematic and experimental sonic experiences. 

BLEASS Flanger is a creative flanging effect with a wide range of sonic possibilities. 

BLEASS Phaser is an all-encompassing phasing effect that offers a vast array of audio capabilities. 

BLEASS Reverb is a unique sounding effect that offers new soundscapes to your music. 

BLEASS Saturator has been designed to energize, crush and explode your sound in a beautiful yet destructive way.

BLEASS Compressor is a comprehensive compression tool offering external sidechain input, input filters and real-time visualization with a a clear and fluid interface & low CPU usage.

Inspired by classic analog filters, BLEASS Filter features an envelope follower as well as a LFO and a warm sound which create mind boggling filter sweep effects!

Lastly, BLEASS Shimmer is a studio-quality reverb that brings stunning harmonic sounds, with a very low CPU usage.

BLEASS Chorus

//

Stereo Image Widener Effect

From subtle classic chorus effects to crazy textures, BLEASS Chorus brings stunning stereo modulations to any sound and allows wide creative freedom for sound design.

BLEASS Chorus is a two-stage chorus effect that offers full control of the stereo image as well as a large range of effects, from subtle stereo wideners to crazy texture generators which you can visualize thanks to a dedicated oscilloscope with a very low CPU usage.

Features

Input Stage

• Low-shelf/High-pass input filter
• Input Gain

Chorus Stage

• Delay Lines – Sets the stereo delay lines count.
• Time – Sets the average delay time.
• Rate – Sets the speed of the LFO.
• Left Depth – Sets the LFO’s amplitude for delay lines’ left channel.
• Right Depth – Sets the LFO’s amplitude for delay lines’ right channel.
• Equal Depths – When toggled on, left and right channels share the same depth. When toggled off, channels are independent of each other.
• Offset – Sets the offset between the delay lines’ LFOs.
• Width – Sets the offset between left and right channels for each delay line.
• Feedback – Sets the amount of feedback for each delay.
• Oscilloscope – Displays a representation of delay lines’ LFOs (tapping the oscilloscope pauses it).

Output Stage

• Dry / Wet Mix

Preset Manager

• Clear and easy to use. 

Learn more about BLEASS Chorus.

BLEASS Delay

Multi-purpose Delay / Echo / Frequency Shifter

BLEASS delay transforms your sounds into cinematic and experimental sonic experiences! It is constantly creating flux in the audio signal making your music even more lively.

BLEASS delay is also ideal for making track build-ups and transitions.

Features

• Delay Line with Sync and Ping Pong Stereo options
• Frequency Shifter in the feedback stage for creating harmonic flux
• Two Filters (Low Pass / High Pass with resonance) for creating warm analogue Echo effects
• Each stage has its own LFO with Stereo Phase to create even wider space movements.

Learn more about BLEASS Delay.

BLEASS Flanger

Extensive Sonic Flanging

BLEASS Flanger is a comprehensive flanging effect with a wide range of sonic possibilities thanks to 2 LFOS, 3 Stages of modulation and beat synchronization.

BLEASS Flanger is a rich sounding flanging effect offering a wide range of synchronised modulations that colours sound in a novel and unique way thanks to its complex algorithmic combinations.

INPUT stage:

• Low-shelf/High-pass input filter.
• Input gain.

LFO A stage: (This LFO modulates DELAY TIME)

• SYNC: sets LFO’s synchronization between BEAT SYNC and FREE SYNC.
• RATE: sets LFO’s rate.
• OFFSET: when BEAT SYNC mode is activated, sets LFO’s offset relatively to the beat.
• SHAPE: select LFO’s shape between sine, triangle, sawtooth, inverted sawtooth, square and random.
• PHASE: sets offset between the LFO’s two stereo channels.
• DEPTH: sets LFO’s amount as a percentage of DELAY TIME’s value.
• STEREO METER: represents LFO’s state.

LFO B stage: (This LFO can modulate either DELAY TIME, DELAY FEEDBACK or DELAY WIDTH)

• SYNC: sets the LFO’s synchronization between BEAT and FREE.
• RATE: sets the LFO’s rate.
• OFFSET: if SYNC is set to BEAT, sets LFO’s offset relatively to the beat.
• SHAPE: select LFO’s shape between sine, triangle, sawtooth, inverted sawtooth, square and random.
• PHASE: sets offset between LFO’s two channels.
• DESTINATION: sets the LFO’s destination between DELAY TIME, FEEDBACK and WIDTH.
• DEPTH: sets LFO’s amount as a percentage of DESTINATION’s value.
• METER: represents LFO’s state (depending on the selected modulation destination).

ENVELOPE FOLLOWER stage: (modulates DELAY TIME depending on the input signal’s level)

• AMOUNT: sets the amount of modulation as a percentage of DELAY TIME’s value.
• ATTACK: sets the attack of the follower.
• RELEASE: sets the release of the follower.

DELAY stage:

• TIME: sets average delay time.
• FEEDBACK: sets average delay feedback.
• WIDTH: sets delay time’s difference between both channels (and average delay time when width is modulated by LFO B).

MIX stage:

• POLARITY: if set to “+“, wet signal is added to the dry signal, if set to “-“, wet signal is subtracted to the dry signal.
• DRY/WET: sets the amount of wet signal added (or subtracted) to the dry signal.

Learn more about BLEASS Flanger.

BLEASS Phaser

All-Around Phasing Effect

All-encompassing phasing effect with a vast array of sonic possibilities, from resonant swirls to stunning atmospheric stereo sounds.

BLEASS Phaser is an all-encompassing phasing effect that offers a vast array of sonic possibilities, from resonant swirls to stunning atmospheric stereo sounds.

PHASER stage:

• Notches: sets the number of all-pass filters, adding a filter creates a new notch in the signal’s spectrum. Notches count can go from 1 to 24.
• Frequency: sets the center frequency of the phaser (the frequency of the all-pass filters).
• Spread: sets the spacing between the notches by changing the Q factor of the filters.
• Feedback: sets the amount of processed signal reinjected into the filters chain. Feedback can be negative.
• Feedback Color: sets the frequency of a low-pass filter applied to the feedback signal.
• Spectrum: a spectrum view representing the estimated frequency position of the notches. Touching this view will adjust the center frequency.

FREQUENCY LFO & SPREAD LFO stages:

• Sine LFOs that modulate the center frequency and the spread parameter of the phaser.
• Sync: sets the sync state between BEAT (synchronised with the host transport and tempo) and FREE.
• Shape: sets the shape of the LFO between Sine and Triangle.
• Rate: sets the LFO rate in Hertz if Sync is set to Free or in fraction of a bar if Sync is set to Beat.
• Phase: sets the phase difference between left and right channels.
• Amount: sets the amplitude of the LFO.

Learn more about BLEASS Phaser.

BLEASS Reverb

Dynamic Reverb with Frequency Shifter

BLEASS Reverb is a unique audio unit effect with filters, freeze toggle button, frequency shifter/waveshaper X/Y panel, and side-chained compressor for duck effect!

BLEASS Reverb is a unique sounding plugin effect bringing your music production and live performances towards new soundscapes!

The BLEASS Reverb is composed of 3 different stages:

Input Stage – A first stage modifies the input source by correcting the gain and setting up early reflections pre-delay in order to re-create distant walls.

Reverb Stage – The second stage offers a unique-sounding reverb with size modulation and length controls. It also contains a high-frequency damping control in order to re-create plate reverb effects, as well as a freeze toggle button for infinite sound soaring and exploration.

Ducker Stage – The third stage offers a duck effect made of a compressor side-chained on the dry input in order to bring clarity to heavy kicks and basses

Learn more about BLEASS Reverb.

BLEASS Saturator

Versatile Motion Waveshaper

BLEASS Saturator has been designed to energize your basses, crush your drums, explode your leads in a beautiful yet destructive sound saturation. The BLEASS Saturator Effect Plugin features a multi-band gain drive, 9 different WaveShaper algorithms, a Pre/Post Bitcrusher, and a LFO to bring motion to your saturation!

This versatile saturation effect processor comes packed with 40 Factory Presets, from classic stereo Drive to crazy metallic bitcrushed Saturations. A clear User Interface guides you through the different stages of sound saturation while offering you a crispy sound design experience through a mesmerizing dynamic WaveShaper Visualizer.

The Multi-Band Drive Stage allows you to set the Drive up to 60db. Activate the EQ mode and set the range of the Low and High Band Frequency parameters. Move the 3 sliders to set Low, Mid & High EQ Gains up to 60db as well.

Learn more about BLEASS Saturator.

BLEASS Compressor

BLEASS Compressor’s flexible dynamics engine makes it an ideal choice in many different situations. With compression ratios of up-to 60:1, a variable knee, and flexible attack and release stages, BLEASS Compressor can deliver a wide range of different response characteristics.

The plug-in’s flexibility is further enhanced by a powerful dual filter that operates on the analysed signal, providing both low-pass and high-pass filtering. The filters work on both internal and sidechain signals, and are resonant too, making it easy to create dynamics effects that are highly frequency dependant.

Despite its versatility and power, BLEASS Compressor is simple to setup and work with. Compression and filter curves are set using tactile graphical widgets, whilst you receive constant easy-to-read visual feedback about how the plugin is operating.

Perhaps best of all, BLEASS Compressor is ultra-efficient, so you can include its intuitive dynamics control to any-and-every part that needs it.

Learn more about BLEASS Compressor

BLEASS Filter

Inspired by the vintage analogue filters found on the world’s most renowned classic synths, and wrapped in our trademark super-modern interface design, BLEASS Filter delivers a great sound along with an intuitive and tactile user experience. The plugin also provides detailed visual feedback that can be read and understood at a glance.

A static filter can be as dull as no filter at all, which is why we have included both an envelope follower and an LFO (Low Frequency Oscillator) in BLEASS Filter. The envelope follower can be tuned to perfectly match your audio, adding dynamic interest to your music, whilst the LFO creates repeating sweeps and movement that can run freely or sync to the beat.

With superb versatility, ultra-efficient processing, and a great price, BLEASS Filter is guaranteed to bring new character and interest to your audio, and a smile to your face!

Learn more about BLEASS Filter

BLEASS Shimmer

Pitch Shifting Studio Reverb

Unique Pitch Shifting Reverb emphasizing harmonics and adding a smooth and pleasing reverb trail to any sound! Clean and flexible UI, Pro quality Shimmer.

BLEASS Shimmer is a studio-quality Shimmer Reverb Effect that brings stunning harmonic tails to any sound or instrument, with a very low CPU usage.

Features

Input Stage

• Touch control filter with two filter types: Low-Shelf and High-Pass.
• Input gain.
• Reverb pre-delay.

2 Pitch-Shifter Stages

Two different pitch shifters each offer 3 pitch-shifting modes:

• Pre – Signal is pitch-shifted and sent directly into the reverb stage.
• Post – Reverberated signal is pitch-shifted.
• Feedback – Reverberated signal is pitch-shifted and fed back again into the reverb stage.

Reverb Stage

• Room size control.
• Colour parameter (control the reverb’s high frequencies).
• Reverb Room Size modulation (amount and rate).
• Length control (200ms – 30s).

Ducker Stage

• The ducker compresses the output signal using the dry signal as sidechain to bring more clarity.
• Compressor parameters: Threshold, Attack and Release.
• Visual Input Sidechain Meter.

Mix Stage

• Dry / Wet Mix

Preset Manager

• Clear and easy to use.

Learn more about BLEASS Shimmer.

System Requirements

PC

• Windows 8 and later (64-bit)
• VST3

Mac

• macOS 10.9 and later (64-bit only) (including macOS 11 Big Sur and M1 processors)
• VST3 / Audio Unit